Monitor Crawl Space Humidity After Installation

Keep a log with date, time, relative humidity, temperature, equipment mode and sensor location.

Illustration of a filter, inspection tools and maintenance paperwork.
Illustrated planning concept. No specific model or installation is depicted.
On this page

Record conditions, settings and location together

Keep a log with date, time, relative humidity, temperature, equipment mode and sensor location. Use a consistent location when comparing observations. Note any change to the setpoint, sensor, access door or drainage route.

A separate instrument helps you compare locations, but differences do not automatically prove a faulty equipment sensor. Compare their placement, timing and stated measurement limits before deciding which reading to trust.

Log field / Why it helps
Log fieldWhy it helps
Temperature and RHKeeps the observed air conditions together
Sensor locationDistinguishes supply air from the area being monitored
Setpoint and modeShows what the equipment was asked to do
Drain observationRecords where water was seen going
Recent changesGives a service provider useful context

Keep measurements separate from assumptions

Do not record a rated capacity as water actually removed. A manual's test point is documentary evidence; a measured collection or power reading needs its own method and time period. Our methodology makes the same distinction.

If you use remote controls, identify the exact accessory and how its reading relates to the onboard control. Check its instructions before assuming a remote display controls the same sensor you are logging.

Choose the next step from the observation

If readings remain higher than expected, use the high-humidity checklist to gather conditions before a service call. If the unit appears to run without collecting water, use the no-water checklist.

Keep initial settings and the installer handoff in the commissioning log. No fixed number of logged days proves that an installation has passed every condition it will encounter.

Keep an ownership record

Sources and limitations

A Brief Guide to Mold, Moisture and Your Home Checked 2026-11-11

U.S. Environmental Protection Agency · Document date: not established · Primary source

Document revision: Page last updated February 18, 2026; original publication date not established.

Moisture and Mold Prevention and Control Tips; footer last-updated date

If possible, keep indoor humidity below 60 percent (ideally between 30 and 50 percent) relative humidity.

This indoor guidance does not establish a universal crawlspace setpoint, a mold-free guarantee, a medical assessment or wood moisture. The quoted passage covers prevention, not mold-remediation steps.

View source reference ↗
Dehumidifier Testing and Capacity Checked 2026-11-11

U.S. Environmental Protection Agency, ENERGY STAR · Document date: not established · Primary source

Document revision: Publication date or revision not established unless stated.

Capacity and energy efficiency metric; testing change

Capacity is defined as the amount of water removed per day (24 hours) at test conditions

The old/new capacity conversion table is approximate. It does not establish a model-specific conversion or a 65°F capacity estimate.

View source reference ↗
Sensor Comparison Checked 2026-11-11

SensorPush · Document date: not established · Primary source

Document revision: Publication date or revision not established unless stated.

Relative Humidity Accuracy rows; HT1, HT.w and HTP.xw columns

Relative Humidity Accuracy (20-80%) (typical)

This model example does not establish accuracy for every sensor or recommend a purchase. Typical tolerance applies to the named model and range; it is not a guaranteed maximum. Placement can affect comparisons, and this source gives no universal separation distance.

View source reference ↗
Can I calibrate my SensorPush sensor? How? Checked 2026-11-11

SensorPush · Document date: not established · Primary source

Document revision: Publication date or revision not established unless stated.

Article opening and accurate-reference warning

First you will need an accurate reference for temperature and/or humidity.

Calibration needs an accurate reference; matching the dehumidifier display alone does not establish accuracy. This citation supports no universal calibration interval or salt/ice procedure.

View source reference ↗
AprilAire Wi-Fi Dehumidifier Installation and Owner’s Manual: E050W, E070W, E080W, E100W and E130W Checked 2026-11-11

AprilAire · Document date: 2026-07 · Primary source

Document revision: 10021212D • 07.26

PDF pages 1–2, 9–10, 21–26; footer revision

Troubleshooting and repairs shall be performed by a qualified HVAC service technician, and all safety procedures shall be followed.

The manual assigns troubleshooting and repairs to a qualified HVAC technician. Cleaning and drain-insert steps depend on the exact model. The revision month/year does not identify every installed unit.

View source reference ↗

Documentary comparison. Confirm the exact model, configuration and installation requirements before ordering.